Perancangan Alat Pengangkat Sistem Hidrolik Tipe H Pada Tempat Pencucian Mobil Dengan Kapasitas Maximum 2.5 Ton

Authors

  • Ervini Meladiyani Program Studi Teknik Industri, Fakultas Teknik Industri, Universitas Suryadarma Jl. Halim Perdana Kusuma Jakarta Timur.
  • Bayu Permana Program Studi Teknik Industri, Fakultas Teknik Industri, Universitas Suryadarma Jl. Halim Perdana Kusuma Jakarta Timur.
  • Marsudi Marsudi Program Studi Teknik Penerbangan, Fakultas Teknik Kedirgantaraan Universitas Marsekal Suradarma, Jl. Halim Perdana Kusuma Jakarta Timur
  • Ahmad Zayadi Program Studi Teknik Mesin, Universitas Nasional Jakarta

DOI:

https://doi.org/10.47313/jig.v21i1.582

Keywords:

Hydrolic system, type H design hoist, SNI

Abstract

Hydrolic system is tecknology wich uses fluid, work fluid that is used is oil with viscosity number of 10 SAE. This system work based on the principle of Pascal Low, that is if fluid given pressure, so that pressure will go to all direction by not added or less its pressure. By calculating of type H design hoist car system where as can be result teol that the permession strength of force material is bigger than the happenned strength of force material b = 9.25 kg/mm2  b =0.34 kg/mm2 and g= 70,98 kg/mm2  g= 10,46 kg/mm2. So that the construction of type H design hoist car system by using of material BJ 37 is said saved and strong to be used. On this type H design hoist car system based on SNI 05-3659-1995 which is about hydrolic fluid power with the rod end spherical eyes could be operated perfectly to hoist the car of 2.5 tonnes load. By desig specification of pump hydrolic capasity which is used 0.2 dm3/minutes, power of pump as big 5.4 KW and maximum of load capasity of 2.5 tonnes.

References

Andrew Parr, Hidrolika dan Pneumatika Pedoman Untuk Insinyur, Erlangga, Jakarta Tahun 2003.

Hagedorn, J.J.M., Konstruksi Mesin 1, Rosda Jaya Putra, Jakarta 1992

Hibbeller, R.C, 1999, Analisa Struktur, PT Prenhallindo

Khurmi R.S. & Gupta J.K. A Text Book of Machine Design , Eurasia Publishing House, New Delhi Tahun 1983

http://mechanic-mechanicalengineering.blogspot.co.id/2011/03/pompa-pump.html

http://www.steelindopersda.com/2014/06/pembagian-dan sifat-sifat-baja.html

Sularso, Kiyokatsu Suga, DasarPerencanaan dan Pemilihan Elemen Mesin, Pradya Paramita, Jakarta

Sato,G.T.,N. Sugiarto H, Menggambar Mesin, Pradya Paramita, Jakarta, 1994.

Yohanes, Tugas Akhir Perancangan Mesin Pengangkat Mobil Dengan Kapasitas 8 Ton, Universitas Nasional, Jakarta 1994.

Downloads

Published

2019-04-09

Issue

Vol. 21 No. 1 (2018): Volume 21 Edisi 1 Tahun 2018

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).