Rancang Bangun Antena Mikrostrip Pattch Rectangular Array 4x1 pada Frekuensi 1800 MHz-2300 MHz

Article Sidebar

PDF
Published: Jun 21, 2021
DOI: https://doi.org/10.47313/jig.v24i1.1144

Main Article Content

Ruliyanta Ruliyanta
Program Studi Teknik Elektro, Universitas Nasional, Jakarta
Endang Retno Nugroho
Program Studi Teknik Elektro, Universitas Nasional, Jakarta

Abstract

4G network is a technology that is currently being developed, known as LTE or 4G. An antenna microstrip for 4G technology is used in this paper. The antenna designed to resonate at a frequency of 1800 MHz-2300 MHz. The antenna design will use FR-4 for its substrate which functions as a dielectric for the antenna. The design is done using the help of CST Studio Suite 2014 software and NI AWR Design Environment v.12 to get the desired antenna characteristics through simulation. From our research we obtained the antenna characteristics such as return loss, VSWR (Voltage Standing Wave Ratio), gain, and bandwidth. In this research, a 4×1 patch rectangular microstrip array antenna has been designed and built that works at a frequency of 2.05 GHz for 4G technology. The antenna design uses the FR-4 for its substrate which functions as a dielectric for the antenna. The design is carried out with the help of CST Studio Suite software to obtain the desired antenna characteristics through simulation. From the research results obtained antenna characteristics such as return loss of -25.225 dB. VSWR (Voltage Standing Wave Ratio) of 1.15, the gain of 3.1 dBi, and bandwidth of 500 MHz with a 4×1 rectangular array antenna design.

Article Details

How to Cite
Ruliyanta, R., & Nugroho, E. R. (2021). Rancang Bangun Antena Mikrostrip Pattch Rectangular Array 4x1 pada Frekuensi 1800 MHz-2300 MHz. Jurnal Ilmiah Giga, 24(1), 35–43. https://doi.org/10.47313/jig.v24i1.1144
Issue
Vol. 24 No. 1 (2021): Volume 24 Edisi 1 Tahun 2021
Section
Articles

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Author Biography

Ruliyanta Ruliyanta, Program Studi Teknik Elektro, Universitas Nasional, Jakarta

FTS

References

H. H. Fadhli Fauzi, Gevin Sepria Harly, “Analisis Penerapan Teknologi Jaringan Lte 4G Di Indonesia,” Maj. Ilm. UNIKOM, vol. 10, no. 2, pp. 281–290.

O. Hatta, “Perancangan Dan Analisa Penggelaran Lte PadaFrekuensi 700 Mhz Dengan Metode Adaptif Modulation Coding Untuk Implementasi Digital Dividend Di Wilayah Sub-Urban Dan Rural Kabupaten Banyumas Design and Analysis of Lte Deployment on 700 Mhz Frequency With Ad,” pp. 342–354, 2016.

F. Malandrino, C. Casetti, and C. F. Chiasserini, “LTE offloading: When 3GPP policies are just enough,” 11th Annu. Conf. Wirel. On-Demand Netw. Syst. Serv. IEEE/IFIP WONS 2014 -Proc., no. April, pp. 1–8, 2014, doi: 10.1109/WONS.2014.6814715.

Y. Rahayu and Y. Asido, “Perancangan Antena Mikrostrip Rectangular Patch dengan Slot Robot Head untuk Aplikasi 4G LTE,” Semin. Nas. dan Expo Tek. Elektro 2017, pp. 158–162, 2017.

U. Dhandha and P. V. R, “Design and Simulation of 4x1 Probe Feed Rectangular Patch Array Antenna for ISM Band Applications,” vol. 3, no. 3, pp. 1537–1539, 2014.

N. A. Wahab, Z. Bin Maslan, W. N. W. Muhamad, and N. Hamzah, “Microstrip rectangular 4×1 patch array antenna at 2.5GHz for WiMax application,” Proc. -2nd Int. Conf. Comput. Intell. Commun. Syst. Networks, CICSyN 2010, no. July, pp. 164–168, 2010, doi: 10.1109/CICSyN.2010.73.

Y. La Elo, F. Y. Zulkifli, and E. T. Rahardjo, “Design of wideband microstrip antenna with parasitic element for 4G/LTE application,” QiR 2017 -2017 15th Int. Conf. Qual. Res. Int. Symp. Electr. Comput. Eng., vol. 2017-Decem, pp. 110–113, 2017, doi: 10.1109/QIR.2017.8168463.

I. Fitri, D. Elfina, and U. Darusalam, “Antena Mikrostrip Multi Grid Patch 2x6 Dicatu Dengan Dual Array Untuk Aplikasi,” pp. 92–95, 2018.

S. Singh, N. Tyagi, and N. Sinha, “Design and analysis of single patch, 2×1 and 4×1 microstrip antenna arrays,” 2014 Int. Conf. Converg. Technol. I2CT 2014, pp. 1–5, 2014, doi: 10.1109/I2CT.2014.7092286.

P. Kumar Mishra, D. R. Jahagirdar, and G. Kumar, “Broadband circularly polarized helical array antenna design for ground to air data link,” 2019 IEEE Indian Conf. Antennas Propagation, InCAP 2019, pp. 3–7, 2019, doi: 10.1109/InCAP47789.2019.9134567.

L. Syarifuddin, “PERANCANGAN ANTENA MIKROSTRIP ARRAY PADA FREKUENSI 2 , 4 GHz UNTUK WIRELESS LOCAL AREA NETWORK,” vol. 2, pp. 26–27, 2010.

IRLANE MAIA DE OLIVEIRA, “Optimasi Perencanaan Jaringan LTE FDD 1800 MHz di Kota Pekanbaru,” FTEKNIK, vol. 4, no. 2, pp. 1–14, 2017.

S. Alam, I. G. N. Y. Wibisana, and I. Surjati, “Rancang Bangun Antenna Mikrostrip Peripheral Slits Linear Array Untuk Aplikasi Wi-Fi,” J. Rekayasa Elektr., vol. 13, no. 1, p. 18, 2017, doi: 10.17529/jre.v13i1.5914.