Rancang Bangun Host Sistem Mini SCADA Untuk Pengontrolan Beban Trafo 20 KV Pada Gardu Induk

Main Article Content

Ikhwanto Ikhwanto
R. A. Kusumoputro
Novi Azman

Abstract

In this era of globalization, the needs of remote control systems is increasing, where the system used is more sophisticated. Similarly, when a transformer operator in electrical substations, which will control and monitor the load transformer 20 KV is still done by hand. This will result in less efficient and optimal performance of the operator. We need a system that can control remotely. To overcome these problems, hence designed "Host Mini SCADA systems for controlling the load on 20 KV transformer substations parent. With this system an operator can perform control and monitoring of the load transformer 20 KV, among others: Frequency, Current, Voltage, and Temperature. In addition, this system also can detect if the transformer is faulty. Monitoring and controlling performed remotely via SMS Gateway. This system consists of a PC (Personal Computer), which functions as process control and remote control units. GSM Modem serves to make the process of data transfer via SMS (Short Message Service). Software Visual Basic, a programming language used to create a program / software on Host mini SCADA system.

Article Details

How to Cite
Ikhwanto, I., Kusumoputro, R. A., & Azman, N. (2019). Rancang Bangun Host Sistem Mini SCADA Untuk Pengontrolan Beban Trafo 20 KV Pada Gardu Induk. Jurnal Ilmiah Giga, 16(1), 7–16. https://doi.org/10.47313/jig.v16i1.585
Section
Articles

References

Agus Harya Maulana, ST, “Fungsi SCADA (Supervisory Control and Data Acquisition)”, Jakarta, 2005.

Adi kurniadi, “Pemograman Mikrosoft Visual Basic 6.0”, PT Elex Media Komputindo, Jakarta, 1999.

Harianto Kristanto, “Konsep Perancangan Database”, PT Elex Media Komputindo, Yogyakarta, 1994.

Khang, Bustam, Ir. ”Trik Pemrograman Aplikasi Berbasis SMS”, Elex Media Komputindo, Jakarta, 2002.

Suhata,ST. “VB Sebagai Pusat Kendali Peralatan Elektronik”, PT Elex Media Komputindo, Jakarta, 2004.

Subari & Yuswanto, “Panduan Lengkap Pemograman Visul Basic 6.0”, Cerdas Pustaka Publisher, Jakarta, 2008.

Uus Rusmawan, “Mengolah Database dengan SQL dan Crystal Report dalam Visial Basic 6.0”, PT Elex Media Komputindo, Jakarta, 2004.