Rancang Bangun Sistem Digital Kalibrator KW Meter dan KVAR Meter Analog 3 Fasa

Article Sidebar

PDF
Published: Mar 20, 2019
DOI: https://doi.org/10.47313/jig.v17i1.535
Keywords:
Kalibrator KW meter KV AR meter mikrokontroler Visual Basic.

Main Article Content

Indra Wahyudi
Program Studi Teknik Fisika, Universitas Nasional
V Vekky R. Repi
Program Studi Teknik Fisika, Universitas Nasional

Abstract

Perancangan sistem digital kalibrator KW meter dan KVAR meter analog 3 fasa ini dibuat dengan menggunakan mikrokontroler dan instrumen PTC-8300H serta Visual Basic 6 sebagai program antarmuka serial pada komputer. Hasil pengujian menunjukkan bahwa hasil verifikasi dari kalibrasi produk memiliki penyimpangan rata-rata sebesar 0,0017 % untuk pengkalibrasian KW meter analog 3 fasa dan 0,0018 % untuk pengkalibrasian KVAR meter analog 3 fasa yang menunjukkan bahwa hasil kalibrasi cukup akurat dibandingkan sistem kalibrator yang telah ada sebelumnya dengan memiliki penyimpangan rata-rata sebesar 0,018 % untuk pengkalibrasian KW meter analog 3 fasa dan 0,016 % untuk pengkalibrasian KVAR meter analog 3 fasa.

Article Details

How to Cite
Wahyudi, I., & Repi, V. V. R. (2019). Rancang Bangun Sistem Digital Kalibrator KW Meter dan KVAR Meter Analog 3 Fasa. Jurnal Ilmiah Giga, 17(1), 19–25. https://doi.org/10.47313/jig.v17i1.535
Issue
Vol. 17 No. 1 (2014): Volume 17 Edisi 1 Tahun 2014
Section
Articles

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

References

Bejo A., C & AVR., Yogyakarta: Graha Ilmu, 2008.

Tzung-Lin Lee and Po-Tai Cheng, IEEE Transactions on Power Electronics 22, 1919-1927 (2007).

C. S. Prasanna Kumar, S. P. Sabberwal and A. K. Mukharji, Electric Power Systems Research 32, 141-143 (1995).

S. S. Kalsi, D. Madura and M. Ingram, IEEE Transactions on Applied Superconductivity 15, 2146-2149 (2005).

A. K. Chakravorti and A. E. Emanuel, IEEE Transactions on Industry Applications 30, 986-997 (2002).

M.S. Alam, E. Kabir, M.M. Rahman and M.A.K. Chowdhury, Energy 29, 1773-1783 (2004).

J. F. Tremayne, IEE Proceedings B - Electric Power Applications 130, 161-170 (2008).

C. Y. Teo , IEEE Transactions on Power Systems 13, 1199-1204 (2002).

George L.W. Perry, Environmental Modelling & Software 19, 559-569 (2004